Lankes, Valerie, Reymus, Marcel, Liebermann, Anja and Stawarczyk, Bogna (2023). Bond strength between temporary 3D printable resin and conventional resin composite: influence of cleaning methods and air-abrasion parameters. Clin. Oral Investig., 27 (1). S. 31 - 44. HEIDELBERG: SPRINGER HEIDELBERG. ISSN 1436-3771

Full text not available from this repository.

Abstract

Objectives The influence of different cleaning methods, air-abrasion parameters, and aging on shear bond strength (SBS) and tensile bond strength (TBS) of 3D resin luted to composite resin. Materials and methods Nine hundred resin substrates were 3D printed (D20II, Rapid Shape) and cleaned with either isopropanol (ISO), butyldiglycol-based solution (BUT), or centrifugation (CEN). After 24-h storage in 37 degrees C water, specimens were air-abraded (mean particle size 50 mu m; n = 60) with either alumina at 0.1 MPa (AL0.1) or 0.4 MPa (AL0.4) and glass pearls at 0.1 MPa (GP0.1) and 0.4 MPa (GP0.4) or conditioned with visio.link (control) and luted with PanaviaV5. Initially (24 h, 37 degrees C water storage) or after aging (10,000 thermal cycles), SBS and TBS were measured, and fracture types were examined. Surface free energy (SFE) and roughness (Ra) were determined after air-abrasion. Kolmogorov-Smirnov, Kruskal-Wallis H, Mann-Whitney U, chi-square, and partial eta-squared were computed. Results SBS measurements presented higher values than TBS (p < 0.001-0.033). Within the pretreatment groups, CEN showed the highest SBS and TBS values compared to cleaning with ISO or BUT (p < 0.001-0.040). Pretreatment with GP0.1 displayed the lowest bond strength values (p < 0.001-0.049), and mostly adhesive fractures occurred. The highest Ra values (p < 0.001) were observed for AL0.4 pretreatment. Conclusions Pretreatment with AL0.4 and the control group mainly presented the highest bond strength values. Thermocycling had a positive effect on the bond strength.

Item Type: Journal Article
Creators:
CreatorsEmailORCIDORCID Put Code
Lankes, ValerieUNSPECIFIEDUNSPECIFIEDUNSPECIFIED
Reymus, MarcelUNSPECIFIEDUNSPECIFIEDUNSPECIFIED
Liebermann, AnjaUNSPECIFIEDUNSPECIFIEDUNSPECIFIED
Stawarczyk, BognaUNSPECIFIEDUNSPECIFIEDUNSPECIFIED
URN: urn:nbn:de:hbz:38-664204
DOI: 10.1007/s00784-022-04800-7
Journal or Publication Title: Clin. Oral Investig.
Volume: 27
Number: 1
Page Range: S. 31 - 44
Date: 2023
Publisher: SPRINGER HEIDELBERG
Place of Publication: HEIDELBERG
ISSN: 1436-3771
Language: English
Faculty: Unspecified
Divisions: Unspecified
Subjects: no entry
Uncontrolled Keywords:
KeywordsLanguage
CAD/CAM; SHEAR; SURFACE; CROWNS; RESTORATIONS; ADHESIVEMultiple languages
Dentistry, Oral Surgery & MedicineMultiple languages
URI: http://kups.ub.uni-koeln.de/id/eprint/66420

Downloads

Downloads per month over past year

Altmetric

Export

Actions (login required)

View Item View Item